Lars
|
| posted on 16/7/09 at 12:40 PM |
|
|
Rally Design Quick Release
I am really tempted my RD's quick release.
Has anoyone fitted this with the standard sierra collum and switches? Does it fit?
Also does the 3/4 slug fit the column?
(I understand that I need to weld it, that is not a problem, just interested if it actually fits the sierra column.)
THis is what I am on about
http://www.rallydesign.co.uk/product_info.php?cPath=82_1812_906&products_id=7344
THanks
Lars
|
|
|
|
|
m8kwr
|
| posted on 16/7/09 at 01:03 PM |
|
|
Not seen or used the rd one, and people are always looking for cheaper alternatives. So please see
LINK
And it does say it will fit the 3/4 inch shaft.
HTH
|
|
|
omega0684
|
| posted on 16/7/09 at 01:18 PM |
|
|
you definately want to get a splined slug & boss, the hex ones have a lot of play in them in comparison, which is not good!
[Edited on 16/7/09 by omega0684]
|
|
|
andy o
|
| posted on 16/7/09 at 01:44 PM |
|
|
as above ^^^^
|
|
|
Lars
|
| posted on 16/7/09 at 04:55 PM |
|
|
Thanks
Definitely after a splined one
Just a question of whether the RD one will fit the sierra column and fit with the switches.
m8kwr - I am not actually sure if the Sierra shaft will take the 3/4 release fitting. (It is still in the car.)
Anyone know?
|
|
|
