RickRick
|
| posted on 4/8/09 at 02:53 PM |
|
|
drivetrain problem
i've got 200 miles on the road now, and it's developed a knocking noise/vibration thats relative to speed, it's r1 powered with a
quife reverse box, freelander diff and sierra driveshafts, just replaced a suspect cv joint but that's not made any difference
any suggestions
|
|
|
|
|
Agriv8
|
| posted on 4/8/09 at 03:15 PM |
|
|
have you cheked you havent thrown a balance weight off a wheel ?
had a spaner check arround the rear end and diff
regards
Agriv8
Taller than your average Guy !
Management is like a tree of monkeys. - Those at the top look down and see a tree full of smiling faces. BUT Those at the bottom look up and see a
tree full of a*seholes .............
|
|
|
Andy D
|
| posted on 4/8/09 at 04:28 PM |
|
|
I'm no bec expert, but I've heard of the big nuts holding the drive flanges on either the engine or reverse box can come loose.
|
|
|
