Printable Version | Subscribe | Add to Favourites
New Topic New Poll New Reply
Author: Subject: Show Me Your Brake Lines
ashg

posted on 9/8/09 at 11:20 AM Reply With Quote
Show Me Your Brake Lines

Ok next little job is to run my brake and fuel lines. i would appriciate seeing how everyone else has run theirs as i cant make up my mind which way i want to go

Cheers

Ash





Anything With Tits or Wheels Will cost you MONEY!!

Haynes Roadster (Finished)
Exocet (Finished & Sold)
New Project (Started)

View User's Profile View All Posts By User U2U Member
Flamez

posted on 9/8/09 at 11:48 AM Reply With Quote
No pics [however look in my blog] but I ran the rear brake line down the inside of the top o/s rail of the tunnel chassis and the fuel line down the bottom rail same side.

Electrics were then ran down the top rail of the n/s.

hth





my build mac1motorsports

View User's Profile View All Posts By User U2U Member
blakep82

posted on 9/8/09 at 12:01 PM Reply With Quote
got my brake lines from russ bost. top quality, braided hose, PVC covered in a range of colours.

i did use braided throughout, for ease of installation, maintainance, and to use as few joints as possible





________________________

IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083

don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!

View User's Profile View All Posts By User U2U Member
cloudy

posted on 9/8/09 at 12:17 PM Reply With Quote
I agree, braided throughout isn't overly expensive - and last much better in these sort of cars....





www.warnercars.com

View User's Profile Visit User's Homepage View All Posts By User U2U Member
MikeRJ

posted on 9/8/09 at 02:25 PM Reply With Quote
Using braided where solid is called for is a bit silly IMO. Kunifer pipe lasts pretty much forever, holds a bend properly and doesn't abrade whatever it touches unlike stainless braided aeroquip. It also swells less under pressure, is cheaper and available at almost any motor factors.

The advantages of aeroquip are...errmm..it looks shiny?

View User's Profile View All Posts By User U2U Member
blakep82

posted on 9/8/09 at 02:29 PM Reply With Quote
braided, easier to route if you change your mind, no need for flaring etc, won't stress fracture under vibration, PVC coated so won't abraid through anything, less fitting need to leak.

not silly at all. race/rally cars brake systems are under a lot more abuse, and they're usually all braided





________________________

IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083

don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!

View User's Profile View All Posts By User U2U Member
britishtrident

posted on 9/8/09 at 03:27 PM Reply With Quote
Using braid lines instead of kunifer on this type of car isn't silly it is completely daft.

Using braided lines instead of rubber/textile flex hoses on a road car isn't as daft but it has more disadvantages than advantages.





[I] “ What use our work, Bennet, if we cannot care for those we love? .”
― From BBC TV/Amazon's Ripper Street.
[/I]

View User's Profile View All Posts By User U2U Member

New Topic New Poll New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.