RichardK
|
| posted on 13/9/09 at 03:27 PM |
|
|
What shape is this hose called?
one end is 38mm and the other is 42 and its like a bent L shape, what's its proper name?
There are many flexible hoses but are there any that will bend and hold the shape as its got to go around the fan belt?
Cheers
Rich
[Edited on 13/9/09 by RichardK]
Gallery updated 11/01/2011
|
|
|
|
|
tomgregory2000
|
| posted on 13/9/09 at 03:32 PM |
|
|
what engine is that off?
no idea what that shape is called
[Edited on 13/9/09 by tomgregory2000]
|
|
|
A1
|
| posted on 13/9/09 at 04:38 PM |
|
|
dont the manufacturers of the engine do them?
not sure on the name
|
|
|
RichardK
|
| posted on 13/9/09 at 05:05 PM |
|
|
Nah its off my locost and I basically stole a bag full of hoses to cut up and try from a fellow locoster so not sure what originally it was supposed
to be off. Can't seem to steal any high quality stuff these days 
I'm going to try a 90 degree reducer elbow to see if that'll clear the fan belt.
Cheers
Rich
Gallery updated 11/01/2011
|
|
|
fazerruss
|
| posted on 13/9/09 at 05:44 PM |
|
|
its a reinforeced 97 degree offset shallow s
Actually ive no bloody idea and i made that up
"if assholes could fly this place would be an airport"
|
|
|
02GF74
|
| posted on 13/9/09 at 07:17 PM |
|
|
41 mm to 38 mm 90 degree reducer elbow .... but not includes the offset.
 <---
linky
|
|
|
RichardK
|
| posted on 13/9/09 at 07:37 PM |
|
|
Aye, trying this one,
Cheers
Rich
Gallery updated 11/01/2011
|
|
|
