blakep82
|
| posted on 20/10/09 at 12:41 PM |
|
|
where to put axle breather?
just coming to a point where i can get my axle rebuilt. but need to think about where the breather's going before its too late, and since i
already forgot about it before i got it all welded up
i've seen some diff covers with a breather tube brazed in. anything i should be careful of with that? i'd be worried about the diff
flinging oil at it
http://www.gartrac.com/store/erol.html#6070X7152
also seen some screw in fittings which need something drilled and screwed in.
http://www.gartrac.com/store/erol.html#6070X7192
[Edited on 20/10/09 by blakep82]
________________________
IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083
don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!
|
|
|
|
|
Mr Whippy
|
| posted on 20/10/09 at 12:47 PM |
|
|
high up on the diff cover but not in line with the crown wheel, I'd make an internal cover over the end of the pipe to help prevent oil being
thrown out
|
|
|
RichieW
|
| posted on 20/10/09 at 03:43 PM |
|
|
The original one on the Ford Atlas axle is on the tube. I assume they put it there for a reason.
|
|
|
02GF74
|
| posted on 20/10/09 at 04:00 PM |
|
|
^^^ likewise on land rovers.
|
|
|
blakep82
|
| posted on 20/10/09 at 10:25 PM |
|
|
ok, warming to the idea of drilling a tube (they're thick enough anyway) and putting one in there.
what about welding one of these in?
________________________
IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083
don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!
|
|
|
