JekRankin
|
| posted on 13/11/09 at 11:05 AM |
|
|
Fitting my shocks
I was trial fitting my polybushed Protech shocks the other day and I noticed that the shock mounting brackets on my wishbones and chassis are a bit
wider than the bushes themselves (approx 2mm). Is it normal to have to space the bushes out with a washer either side, or have I got the incorrect
width of bush?
On some cars I’ve seen, it looks like the polybush fills the entire width of the mounting bracket.
Jek
|
|
|
|
|
Bluemoon
|
| posted on 13/11/09 at 12:14 PM |
|
|
MK's are the same, washers needed (2mm is not to much, larger and a machined spacer would be better, but i used washers!)..
Dan
|
|
|
dhutch
|
| posted on 13/11/09 at 12:44 PM |
|
|
Ditto, i also used washers.
|
|
|
