bobMKindy
|
| posted on 20/11/09 at 11:52 AM |
|
|
Wilwood powerlite Ferodo Pads
Does somebody know if Ferodo DS2500 are available for wilwood calipers ??
If not..which pads work best for (sporty) road use??
|
|
|
|
|
coozer
|
| posted on 20/11/09 at 11:54 AM |
|
|
Theres Green Stuff pads listed on the EBC website but no where to buy them! I think Demon tweeeeeeks do the Feroda ones.
Feeling rich?
1972 V8 Jago
1980 Z750
|
|
|
adithorp
|
| posted on 20/11/09 at 12:03 PM |
|
|
Mintex 1144. Rally Design stock them.
adrian
"A witty saying proves nothing" Voltaire
http://jpsc.org.uk/forum/
|
|
|
madrallysport
|
| posted on 20/11/09 at 12:40 PM |
|
|
quote:
Originally posted by bobMKindy
Does somebody know if Ferodo DS2500 are available for wilwood calipers ??
If not..which pads work best for (sporty) road use??
DS2500 take a fair bit of heating before they work properly, also they're carbon based and spark a lot, so they're sore on wheels, I used
them on the back of my rally car a few years ago, with DS3000 on the front.
DS pads are also very snatchy in the wet, causing a lot of lock ups
For front road use as above 1144 are good, but again need a little heating.
[Edited on 20/11/09 by madrallysport]
UNDERSTEER is when you hit the wall with the front of the car.
OVERSTEER is when you hit the wall with the rear of the car.
HORSEPOWER is how fast you hit the wall.
TORQUE is how far you take the wall with you.
|
|
|
bassett
|
| posted on 20/11/09 at 01:48 PM |
|
|
Hi, I cant comment for kit cars and the way they will react differently but the ds2500 racing pads on my cupra r with stock brembo discs and calipers
are bloody awesome. I find no noticeable difference between cold and hot. Who sells ferrodo pads for the wilwoods as i didnt realise there were any
available other than mintex?
|
|
|
