dave r
|
| posted on 30/1/10 at 01:44 PM |
|
|
haynes bottom front bone plate
anyone got a drawing of the above in cad format that i can have
|
|
|
|
|
luke
|
| posted on 30/1/10 at 02:16 PM |
|
|
Same as in the book? I can knock one up tonight for you if needed.
|
|
|
dave r
|
| posted on 30/1/10 at 02:28 PM |
|
|
yes if no-one else hasnt already got one!
thanks
|
|
|
luke
|
| posted on 30/1/10 at 02:45 PM |
|
|
Any particular file format you need?
|
|
|
dave r
|
| posted on 30/1/10 at 03:43 PM |
|
|
dwg, dxf anything autocad lite will handle
|
|
|
madrallysport
|
| posted on 30/1/10 at 05:16 PM |
|
|
quote:
Originally posted by dave r
anyone got a drawing of the above in cad format that i can have
I have a pair of plates already cnc cut if you want to make me an offer, they're going cheap.
UNDERSTEER is when you hit the wall with the front of the car.
OVERSTEER is when you hit the wall with the rear of the car.
HORSEPOWER is how fast you hit the wall.
TORQUE is how far you take the wall with you.
|
|
|
dave r
|
| posted on 30/1/10 at 07:40 PM |
|
|
the plates wouldnt be any use to me....
but they are close to what i will need
|
|
|
luke
|
| posted on 30/1/10 at 08:00 PM |
|
|
dave,
do you need the diagram showing the bend? or just as a flat plate.
|
|
|
luke
|
| posted on 30/1/10 at 10:46 PM |
|
|
file attached, if you find the format wont work let me know.
its the one format that seemed to be able to work.
|
|
|
dave r
|
| posted on 31/1/10 at 08:39 AM |
|
|
audocad lite cant open that... have been promised another copy on another forum, so no worries yet
only need the flat profile
|
|
|
dave r
|
| posted on 31/1/10 at 04:10 PM |
|
|
sorted thanks
|
|
|
