joemotion
|
| posted on 2/3/10 at 07:36 PM |
|
|
Top Ball Joint
i have just bought a couple of replacement balljoints for the front end as my others were damaged and didnt trust the nut to stay on. I got these as
link -
Linky
however....the threaded end is too small to fit in the wishbone. can anyone recommend a site or something off ebay that will have the correct ones to
fit a tiger avon? the ones i have bought were transit ones and cheap - the ones on the tiger site are expensive!
|
|
|
|
|
Red16
|
| posted on 2/3/10 at 07:44 PM |
|
|
Rally Design are usually good for stuff like that
http://www.rallydesign.co.uk/
|
|
|
Peteff
|
| posted on 2/3/10 at 07:59 PM |
|
|
If the M18 ones are too small you need the later ones which were M20 x 1.5 and were I think track rod ends for the Mk3 Transit as opposed to drag
links for the earlier model.
Ebay ones
yours, Pete
I went into the RSPCA office the other day. It was so small you could hardly swing a cat in there.
|
|
|
joemotion
|
| posted on 2/3/10 at 09:20 PM |
|
|
cheers for your help - i will get the mk3 one from ebay
if anyone is interested in the older type let me know before i sent them back for a refund
joe
|
|
|
locostbuyer83
|
| posted on 15/3/10 at 05:01 PM |
|
|
Hi,
Sorry to bring this thread back up but i used it to order my drag links but that ebay item has ended and the guy has run out (Got one off him, need
two).... Do you guys think these will be the same?
http://cgi.ebay.co.uk/QR2226S-TRACK-ROD-END-FORD-TRANSIT-1986-1992_W0QQitemZ160343785359QQcmdZViewItemQQptZUK_CarsParts_Vehicles_CarParts_SM?hash=item
25553bff8f
Thanks
Stuart
|
|
|
MikeRJ
|
| posted on 15/3/10 at 05:14 PM |
|
|
No, that is for the track rod end rather than the drag link end. This is a
useful list of manufacturers part numbers for the drag link end.
|
|
|
locostbuyer83
|
| posted on 15/3/10 at 06:23 PM |
|
|
nice one cheers,
searched ebay inc descriptions and only found this
http://cgi.ebay.co.uk/Drag-Link-End-Rear-Ford-Transit_W0QQitemZ190354845754QQcmdZViewItemQQptZUK_CarsParts_Vehicles_CarParts_SM?hash=item2c5208703a
/>
expensive though
|
|
|
locostbuyer83
|
| posted on 27/3/10 at 02:14 PM |
|
|
turns out the MK indy uses M18 size.
I now have a pair of the m20 ones if anyone needs them
|
|
|
