Pdlewis
|
| posted on 15/3/10 at 10:50 PM |
|
|
What size M/c
Hi,
I need to replace my rear master cylinder as I think it is causing me issues (im down to this by a process of elimination) what bore are people
running for sierra rear calipers? I currently have .625 on the fron and .75 on the rear is this correct?
at the min to get any brake force on the rar i have to adjust the bias so the front is nearly on the end of the bar this then causes me issues with
the other en of the bar hitting the accelerator as you brake which isnt ideal, I hope this is just because i have an issue with the M/C not operating
correctly
Cheers
Paul
[Edited on 15/3/10 by Pdlewis]
Build Photo Album
Updated 05/02/2009
|
|
|
|
|
britishtrident
|
| posted on 16/3/10 at 08:40 AM |
|
|
You could try either a 0.625" or 0.7" cylinder in the rear circuit.
Off the top of my head
0.625" = 33% increase in rear pressue to rear
0.7" = 12% increase in rear pressure to rear
Based on that I would guess the 0.625" would be best for getting balance bar somewhere near centre.
[I] “ What use our work, Bennet, if we cannot care for those we love? .”
― From BBC TV/Amazon's Ripper Street.
[/I]
|
|
|
