aka Keith
|
| posted on 24/3/10 at 07:27 PM |
|
|
grease for brake guide pins?
I got my reconditioned caliper back from Bigg Red. have to say fantastic service from them.
Anyway, I am looking to put them back together and I was wondering about the grease in the guidepins?
I have some high melting point lithium grease in the garage, can I use this, or do I have to use a specific grease?
|
|
|
|
|
blakep82
|
| posted on 24/3/10 at 07:30 PM |
|
|
erm, you don't really want grease on your brake pads...
you can put copper grease on the back of the pad i think, only a tiny smear, peraps the same on the pin.
________________________
IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083
don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!
|
|
|
britishtrident
|
| posted on 24/3/10 at 07:32 PM |
|
|
If it is floating Sierra calipers either "Red Rubber Grease" or silicone grease. Anything else will cause the rubber water seals to
swell harden and rot.on the guide pins.
For Cortina style calipers you don't really want to greaee them just a tiny ammount of Copaslip to make 100% sure the pads move freely in the
calipers
[Edited on 24/3/10 by britishtrident]
[I] “ What use our work, Bennet, if we cannot care for those we love? .”
― From BBC TV/Amazon's Ripper Street.
[/I]
|
|
|
aka Keith
|
| posted on 24/3/10 at 07:38 PM |
|
|
Cheers britishtrident, it is the floating sierra calipers, so it is of to the factor tomorrow to get tomorrow to get some "red rubber" or
silicone grease in the morning.
Cheers
Craig
PS secondary question: the piston notches are not at 12 and 6 so as to receive the pads, how do I turn the piston to fit?
|
|
|
blakep82
|
| posted on 24/3/10 at 07:41 PM |
|
|
angle grinder keys usually fit apparently
________________________
IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083
don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!
|
|
|
aka Keith
|
| posted on 24/3/10 at 07:44 PM |
|
|
I know it is a sin, but I do not have an angle grinder.
Any other options?
Cheers
Craig
|
|
|
Paul TigerB6
|
| posted on 24/3/10 at 07:48 PM |
|
|
I struggled to find red rubber grease locally and ended up buying a tube from Ebay for £2.50 or so.
link
|
|
|
adithorp
|
| posted on 24/3/10 at 08:42 PM |
|
|
quote:
Originally posted by aka Keith
I know it is a sin, but I do not have an angle grinder.
Any other options?
Cheers
Craig
They can be turned with grips on the edge of the piston if you're carefull (mind the rubber) 90'bend longnose pliers also works.
Sliders should be rubber grease or silicone grease. Don't over do it; Only needs a smear.
As said lots of times before, DON'T operate the handbrake untill you've pumped the foot braketo bring the pistons out.
adrian
"A witty saying proves nothing" Voltaire
http://jpsc.org.uk/forum/
|
|
|
aka Keith
|
| posted on 24/3/10 at 08:50 PM |
|
|
Cheers adithorp,
many thanks for the hints.
Cheers
Craig
|
|
|
