Miks15
|
| posted on 29/5/10 at 03:00 PM |
|
|
Steering UJ help
I guys, i need to get a new UJ for my column, the problem at the minute is, the bmw one has a flange on it, which i can then bolt on the rest of the
steering link, but as it is, the flange hits one of the HT leads.
Im either looking for a steel replacement, that i can weld on the the steering link so there is no flange protruding to hit the HT lead, or a shorter
one.
Does anyone know of any other car that has 52 splines (i think, i counted them i think i counted them all  ) and 18mm diameter.
|Thanks
Mikkel
|
|
|
|
|
jossey
|
| posted on 29/5/10 at 08:02 PM |
|
|
your nuts. lol counting splines.
why not extend one end and shorted other thus moving the flange
|
|
|
Miks15
|
| posted on 29/5/10 at 08:09 PM |
|
|
i know i am, only way i could do it Thats why im not 100 percent sure its right !
Well if i cant find anything, im going to have to get someone to weld the uj for me (its ally). Theres quite a big bit between acutal joint and the
flange where i can take about 20mm out and weld back up
|
|
|
Liam
|
| posted on 30/5/10 at 11:36 PM |
|
|
52?? Sure you didn't count a few laps round the shaft?
|
|
|
