the moa 2
|
| posted on 24/5/04 at 11:46 AM |
|
|
suspension set up querry.!!
hi every one.
just got the chassis rolling (well chuffed).
just one thing though the wheels have a
lot of positive camber. will the camber pull in when the engine is in alot. or only alittle? just woundering as i expected the wheels to sit straight.
ive moved all the ajustments as much as i can to get it to sit straight but no luck.
any advise.
cheers.
|
|
|
|
|
Peteff
|
| posted on 24/5/04 at 12:06 PM |
|
|
How level are your bottom wishbones? Get a couple of your mates, preferably fat ones, to stand in the engine bay on the rails and see if it makes a
difference or put a jack under the chassis and take the shocks off then lower the front down to see what happens.
yours, Pete
I went into the RSPCA office the other day. It was so small you could hardly swing a cat in there.
|
|
|
the moa 2
|
| posted on 24/5/04 at 12:27 PM |
|
|
hi.
My bottom wishbones are angled down.
but ill have to see what will happen when i get a couple my larger friends to stand on front.
cheers.
|
|
|
