Miks15
|
| posted on 12/7/10 at 07:49 PM |
|
|
M14 rod end with 16mm hole?
Anyone know of anywhere i can get and M14 female rod end, but with a 16mm hole?
This is to suit my on going quest to connect my steering up
|
|
|
|
|
blakep82
|
| posted on 12/7/10 at 10:08 PM |
|
|
think you'll need some extentions on the steering arms too won't you?
in which case, i think you'l find it easier to get custom extentions made up. M14 thead in one end, M16 thread in the other, for a male rod end
to screw into?
i think thats how mine are on the truck?
i'll go and measure the rod ends on the uprights
edit
i couldn't measure properly without taking it all apart, but the rod end in mine looks to be 1/2", the the extention is metric one end,
and imperial in the other.
if i remember your photo right, you'll need extentions anyway
[Edited on 12/7/10 by blakep82]
________________________
IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083
don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!
|
|
|
Miks15
|
| posted on 12/7/10 at 10:34 PM |
|
|
yep i do needc extensions, but i already have some standard extensions. so hoping i can use these still
|
|
|
flak monkey
|
| posted on 13/7/10 at 06:04 PM |
|
|
M14 to M16 extensions would be the cheapest and easiest option.
David
Sera
http://www.motosera.com
|
|
|
