daniel mason
|
| posted on 18/7/10 at 05:04 PM |
|
|
clutch master cylinders?
i need a clutch master cylinder (integral) for my mnr with a 5/8 bore to match the s2000 one which does not fit. both my brake master cylinders are
wilwood and bolt through the pre-drilled holes in the pedal box assy, the wilwood ones are a bit expensive so was wondering if there was another
alternative with same bolt pattern? cheers
|
|
|
|
|
spdpug98
|
| posted on 18/7/10 at 05:10 PM |
|
|
Have you had a look on Comp Brake:
http://compbrake.co.uk/shop/advanced_search_result.php?keywords=master&osCsid=452c76e1ba2e77414160dc5e66fe109f
Hope the build is coming along well
My Blog: http://spdpug98.wordpress.com/
|
|
|
chris mason
|
| posted on 18/7/10 at 05:15 PM |
|
|
Your fitting an S2000 engine in an Mnr and you think £25 for a master cylinder is expensive 
Think you may need to do your sums again, if you think it's ever going to be cheap 
|
|
|
daniel mason
|
| posted on 18/7/10 at 05:30 PM |
|
|
just want it to be as cheap as possible and not throw money away if i dont need to! thanks for the heads up with that site mate,very helpful once
again!
[Edited on 18/7/10 by daniel mason]
|
|
|
chris mason
|
| posted on 18/7/10 at 05:38 PM |
|
|
But is £25 on a clutch master Cylinder worth saving money on, buy a cheaper one or a 2nd hand one and it will ruin your enjoyment of the car, when it
starts to play up.
Now if your target was build it and race it for £250 ron champion stylee, then i'd understand, but your choices so far ruled out that option.
|
|
|
daniel mason
|
| posted on 18/7/10 at 06:57 PM |
|
|
will opt for a wilwood one then!
|
|
|
