beaver34
|
| posted on 2/8/10 at 07:36 PM |
|
|
brake line fitting
hello,
i need a 3/8 unf to m10x1 adaptor
where im i going to get one from, will pirtek do stuff like this or mend a hose?
|
|
|
|
|
Stott
|
| posted on 2/8/10 at 08:54 PM |
|
|
Is there enough space available to use a bit of copper brake pipe with a 3/8UNf fitting one end and an M10x1 the other?
Cheap solution if there is
ATB
Stott
|
|
|
jossey
|
| posted on 2/8/10 at 09:34 PM |
|
|
go down to gsf on kirkstall road they sell them or they did the last time i needed one.
BMS on dewsbury road will be able to get you one too. i used them for all my sierra brake bits. only bit they couldnt get me was the pressure brake
switch. :O)
cheers
dave.
works ls28
|
|
|
