-matt
|
| posted on 25/8/10 at 04:44 PM |
|
|
rear caliper piston problem?
well ive been refurbing my sierra calipers.
but have a problem with re-installing the one rear piston.
basically if i turn it in with no downforce (even if its most of the way down the caliper), then it just spinns.
it will only go down into the caliper if i put lots of force onto it.
any ideas if this will cause me any problems?
as i don't really know how the rear calipers work.
cheers
|
|
|
|
|
DRC INDY 7
|
| posted on 25/8/10 at 04:47 PM |
|
|
Thats correct you have to apply force when turning the piston back in
[Edited on 8/25/2010 by DRC INDY 7]
https://www.facebook.com/groups/462610273778799/
Puddle Dodgers Club
|
|
|
-matt
|
| posted on 25/8/10 at 05:05 PM |
|
|
ah good.
just the other side went in with barely any force.
|
|
|
-matt
|
| posted on 26/8/10 at 10:20 AM |
|
|
also is there likely to be a problem with the one that went in very easy, with no force required?
|
|
|
