stevegough
|
| posted on 11/1/11 at 09:55 PM |
|
|
Next question..... Nut sizes - camber adjusters.
Does anyone know what pitch and size (pretty sure they're M18) rear camber adjusters are? I need to get another 2 locknuts for my IVA
retest.
[Edited on 12/1/11 by stevegough]
Luego Locost C20XE.
Build start: October 6th 2008.
IVA passed Jan 28th 2011.
First drive Feb 10th 2011.
First show: Stoneleigh 1st/2nd May 2011.
'Used up' first engine may 3rd 2011!
Back on the road with 2nd engine may 24th
First PASA mad drive 26/7/11
Sold to Mike in Methyr Tydvil 19/03/14
|
|
|
|
|
nick205
|
| posted on 11/1/11 at 10:11 PM |
|
|
MK ones were M20 IIRC - for the rear suspension - although re-reading I'm guessing your on about the front suspension 
[Edited on 12/1/11 by nick205]
|
|
|
mad4x4
|
| posted on 12/1/11 at 07:01 AM |
|
|
IIRC thought that they they were M18 x 1.0mm think the 1.0mm pitch makes them harder I remember the normal lock nuts wouldn't fit . Try
Butron power or NUMRICK or MK
[Edited on 12/101/11 by mad4x4]
Scot's do it better in Kilts.
MK INDY's Don't Self Centre Regardless of MK Setting !
|
|
|
rusty nuts
|
| posted on 12/1/11 at 07:08 PM |
|
|
Same thread as the front upper joints, doubt it will be 18mm x1mm . When I got mine I think Lolocost sold them. Might be worth investing a couple of
pounds in a set of thread gauges
[Edited on 12/1/11 by rusty nuts]
|
|
|
stevegough
|
| posted on 12/1/11 at 08:52 PM |
|
|
quote:
Originally posted by nick205
MK ones were M20 IIRC - for the rear suspension - although re-reading I'm guessing your on about the front suspension
[Edited on 12/1/11 by nick205]
Thanks for the replies, lads,
No, they are for the rear, and I am certain about the M18 size - probably varies a little from kit to kit?
Rusty nuts is a fellow Luego chappie - and yes, I think they are the same front and rear. Doesn't help me a lot though - there isn't any
thread showing at the front!
Just had a close look, they are M18 x 1.5 so that's what I'm going to order, Mel.
Cheers again guys. - any of you any input about the wheelnut
question?....see....wrong nut
regards, Steve.
Luego Locost C20XE.
Build start: October 6th 2008.
IVA passed Jan 28th 2011.
First drive Feb 10th 2011.
First show: Stoneleigh 1st/2nd May 2011.
'Used up' first engine may 3rd 2011!
Back on the road with 2nd engine may 24th
First PASA mad drive 26/7/11
Sold to Mike in Methyr Tydvil 19/03/14
|
|
|
.jpg)
