sierra bleed screws
just went to order some new ones, the ones on my calipers are crusty, and 'painted' by whoever i bought them from. not sure this is a
brilliant idea to paint them, so i thought to buy some new ones. i noticed they have the same thread as the brake hose input port. i have my calipers
behind the axle, so the inlet and bleed screw are just about level, witht he input being very slightly higher. i can make it higher by undoing the
top bolt, and rocking it back slightly.
is there any benefits or is it a terrible idea to swap them round? it could be quite useful. also because my brake hoses are slightly too long, by
only a very small amount, and it will also help to lose some of the length too
________________________
IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083
don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!
|
