beaver34
|
| posted on 5/2/11 at 09:14 PM |
|
|
m/c threads
hi all,
any one know what master cylinder thread? i need a banjo for mine and its not the size ive got spare its bigger which is not much use to you i know
but wandered if they were just two sizes
thanks
|
|
|
|
|
tomgregory2000
|
| posted on 5/2/11 at 09:16 PM |
|
|
7/16th unf springs to mind but i dont know why
|
|
|
jacko
|
| posted on 5/2/11 at 09:19 PM |
|
|
What M/C do you have ?
|
|
|
beaver34
|
| posted on 5/2/11 at 09:25 PM |
|
|
quote:
Originally posted by jacko
What M/C do you have ?
ill double check
|
|
|
beaver34
|
| posted on 5/2/11 at 09:49 PM |
|
|
girling 625 i think it says
|
|
|
adithorp
|
| posted on 5/2/11 at 10:26 PM |
|
|
The 625 doesn't really help as thats just the bore size, 0.625" or 5/8"
Common thread sizes are 10x1mm and 7/16unf you might come across a 12x1mm but I doubt it. We realy need more info or a crystal ball.
"A witty saying proves nothing" Voltaire
http://jpsc.org.uk/forum/
|
|
|
big_wasa
|
| posted on 5/2/11 at 10:59 PM |
|
|
One for the fluid res will be 7/16 the one you want will be 3/8" 24tpi
|
|
|
owelly
|
| posted on 5/2/11 at 11:04 PM |
|
|
The top of that nubbin where the banjo is trying to seal isn't a machined surface so you may have trouble getting it to seal. If you do have
trouble, try a thicker copper washer.
http://www.ppcmag.co.uk
|
|
|
rusty nuts
|
| posted on 6/2/11 at 08:30 AM |
|
|
As said the inlet is likely to be 7/16"UNF and the outlet 3/8" UNF . A grommet on the hose where it goes through the panel would be a good
idea as well
|
|
|
beaver34
|
| posted on 6/2/11 at 07:51 PM |
|
|
thanks guys, ill order one of each anyway, got some grommits to stop it rubbing this weekend
|
|
|
.jpg)
