tilly819
|
| posted on 22/2/11 at 09:50 PM |
|
|
MX5 Upright Drawing ?
hi all
Bit off a long shot i now but i was wondering if anyone has or nows were to find a dimensioned drawing of the MX5 front uprights?
also are all the MX5 front uprights the same between all of the models?
cheers tilly
F20C Haynes roadster 440 BHP/Tonne www.youtube.com/handmadeextreme
|
|
|
|
|
orton1966
|
| posted on 23/2/11 at 06:25 AM |
|
|
locost USA
Hi,
I'm sure this information has been posted here on the UK site but it's also here on the USA site
http://www.locostusa.com/forums/viewtopic.php?f=5&t=1292
Just be aware that they call the MX5 the Miata, also a couple of people posted on the thread with slightly differing measurement but I think this is
more error in finding the centre of the ball joint rather than different sized units, still worth a read through though!!
Just spotted who you are, I’ll give you a call later, also I have a set of MX5 uprights if you want to measure/see them for yourself. On the plus side
they do have centre point steering, unfortunately they achieve this through, something like, 11 degree KPi
[Edited on 23/2/11 by orton1966]
|
|
|
tilly819
|
| posted on 23/2/11 at 11:25 AM |
|
|
chears
tilly
F20C Haynes roadster 440 BHP/Tonne www.youtube.com/handmadeextreme
|
|
|
