mads
|
| posted on 27/2/11 at 05:40 PM |
|
|
stub axles
afternoon all,
are the stub axles on the ford push in shafts identical to the stub axles on lobro shafts?
Cheers
mads
We gain knowledge faster than we do wisdom!
Life is not a journey to the grave with the intention of arriving safely in a pretty and well-preserved body, but rather to skid in
sideways, thoroughly used, totally worn out and loudly proclaiming... "f*ck, what a trip!"
|
|
|
|
|
minitici
|
| posted on 27/2/11 at 08:40 PM |
|
|
I doubt it as the stub axles are part of the CV on the push-in ones and the Lobro one had a location for 6 bolt Lobro joint attachment.
|
|
|
omega0684
|
| posted on 27/2/11 at 09:41 PM |
|
|
how are the stub axles part of the joint on a push in shaft? i would have thought that the stub axle sits inside the hub/bearing carrier the same as
it does on on the lobro joint.
I love Pinto's, even if i did get mine from P&O!
|
|
|
