big-vee-twin
|
| posted on 28/7/13 at 04:39 PM |
|
|
Panhard Rod
Not happy with my current arrangement so looking to change a few things.
Who could make me a new panhard rod with a boss in each end to accept a rose joint? Or where could I buy one from.
Duratec Engine is fitted, MS2 Extra V3 is assembled and tested, engine running, car now built. IVA passed 26/02/2016
http://www.triangleltd.com
|
|
|
|
|
coozer
|
| posted on 28/7/13 at 04:51 PM |
|
|
How long? Have a look at a Landrover front one.
All the 4x4 places have ones with a threaded end for lifted vehicles that need a bit extra length.
This is off my Range Rover Classic, same as Disco 1 and Defender.
1972 V8 Jago
1980 Z750
|
|
|
britishtrident
|
| posted on 28/7/13 at 05:06 PM |
|
|
McGill Motor sports on ebay will sell you the threaded bosses, Rose joints and rubber, as long as you cut the tube with straight
using a hacksaw all that is needed is reasonable welds.
[Edited on 28/7/13 by britishtrident]
[I] “ What use our work, Bennet, if we cannot care for those we love? .”
― From BBC TV/Amazon's Ripper Street.
[/I]
|
|
|
TimC
|
| posted on 28/7/13 at 05:34 PM |
|
|
Dave at http://www.trackdevelopments.co.uk/ would make you one I'm sure.
He made mine anyway.
|
|
|
