timwest167
|
posted on 8/11/04 at 11:30 AM |
|
|
Best place for new bits
Hi all,
I've just cleaned up my front hubs, uprights, etc. I need some new grease seals, brake disk retaining pins, split pins etc. Where is the best
place to get this sort of stuff? As they're cortina parts do Ford still do them?
Thanks
Tim
|
|
|
tom_loughlin
|
posted on 8/11/04 at 11:44 AM |
|
|
the last place i would go is ford to be honest - they charge you through the roof!!
i get my stuff from a tiny old fasioned garage not far from my place.
an old guy runs it, and knows exactly where everything is in the shop and charges reasonable prices.
tom
|
|
ned
|
posted on 8/11/04 at 11:48 AM |
|
|
Darren @ GTS sells these bits i think...
beware, I've got yellow skin
|
|
Bob C
|
posted on 8/11/04 at 12:09 PM |
|
|
Ned - what were you thinking re: avatar hat - it's the 8th of November man!!!!
Do you not realise this is a forum of grumpy old men.............
Merry Xmas
Bob
|
|
ned
|
posted on 8/11/04 at 12:18 PM |
|
|
see:
http://forum.locostbuilders.co.uk/viewthread.php?tid=19044
I'm not the first and doubt i'll be the last...
Ned.
beware, I've got yellow skin
|
|
Bob C
|
posted on 8/11/04 at 12:37 PM |
|
|
yep should have looked under "anything else" -
happy new year
Bob
|
|
Mix
|
posted on 8/11/04 at 01:53 PM |
|
|
Brakes International at www.brakesint.co.uk are the best I've found pricewise.
Mick
|
|
Robster
|
posted on 9/11/04 at 12:50 PM |
|
|
Grease Seals
I found all of the parts I needed to complete the refurb of my Cortina calipers & front uprights either from Brakes International or Halfrauds -
they had a couple of bargains.
But, I cannot find replacement grease seals for the front bearings? I was that desparate, I even went to Ford, who could not get them.
Where have you guys sourced these from?
Rob.
|
|
Peteff
|
posted on 9/11/04 at 01:06 PM |
|
|
Robster...
Is that Chinese seafood? I bought new bearing kits for the front uprights and the seals came with them. Hardly worth scrounging round as the complete
set was only about £12 per side.
yours, Pete
I went into the RSPCA office the other day. It was so small you could hardly swing a cat in there.
|
|