Dave Bailey
|
| posted on 19/5/14 at 07:48 PM |
|
|
Sticky steering bush
I thought too good to miss out on a run tonight... A couple of miles in the steering felt a little stiff. Pulled over and stationary the steering felt
fine going lock to lock... Started driving again having checked everything else. It seems as if it just feels a little difficult coming off straight
ahead... The only thing I can think of is the bush that goes through the bulkhead which is nylon/plastic and sits in a rubber outer... needs
lubricating.... What is best go use?
Thanks
Dave B
|
|
|
|
|
rusty nuts
|
| posted on 19/5/14 at 08:02 PM |
|
|
A self aligning bearing! Cost about a tenner and transformed my car making the steering self center easily . The Luego mounting flange for the
plastic bush isn't perfectly in line with the steering column and will bind . IIRC my bearing came from Simply Bearings , do a search on here ,
it's been covered several times HTH
|
|
|
Dave Bailey
|
| posted on 19/5/14 at 08:13 PM |
|
|
Ok will do thanks
Dave B
|
|
|
serieslandy
|
| posted on 19/5/14 at 09:58 PM |
|
|
A guide
SLFL 25 Self Lube Bearing RHP - NSK
|
|
|
.jpg)
