turbodisplay
|
| posted on 21/3/15 at 12:19 PM |
|
|
78mm PCD Lobro no plunging CV?
Is there such a thing as a 78mm PCD Lobro CV joint that is fixed, ie no in and out movement ? (just reminded me of Clockwork orange )
Found that larger sizes do that on the net, but no luck with 78mm so far.
And if so what car has them?
I require it for my front prop drive, and the VW ones I have cause problems with the in/out movement.
A UJ fitting may be tight, but as I require a bit of an angle I may have problems going for a UJ.
thanks in advance
Darren
|
NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
|
|
|
CNHSS1
|
| posted on 21/3/15 at 12:43 PM |
|
|
Have a look at Trident Racing Supplies and Merlin Motorsport, both do a full range of specialist lobros
"Racing is life, everything else, before or after, is just waiting"---Steve McQueen
|
|
|
turbodisplay
|
| posted on 21/3/15 at 01:33 PM |
|
|
Thanks - will do!
Darren
|
NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
|
turbodisplay
|
| posted on 22/3/15 at 08:36 AM |
|
|
Looked, they do have some with +-8mm that may work, but still looking for a fixed cv.
Thanks
Darren
|
NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
|
dave_424
|
| posted on 22/3/15 at 10:49 AM |
|
|
https://www.youtube.com/watch?v=JGQ983J9j78 half way through the video, not sure what the pcd is though
|
|
|
