the_big_1
|
| posted on 19/10/16 at 11:52 AM |
|
|
Sierra Upright Tapering
Hi Guys,
I need a Sierra uprights tapering out to accept the maxi ball joint etc.
Can you recommend who can help around the Midlands area?
I tried to contact MK a few times but no email response and no answering calls etc.
Cheers!
|
|
|
|
|
procomp
|
| posted on 19/10/16 at 12:24 PM |
|
|
Hi. I'm pretty sure i've still got the jigs and reamers to do the job.
Just of J6 M6.
Cheers Matt
|
|
|
the_big_1
|
| posted on 19/10/16 at 12:34 PM |
|
|
Hi,
I am junction 3 so that would be fab if you could check you have?
Cheers!!!
|
|
|
procomp
|
| posted on 19/10/16 at 12:48 PM |
|
|
Hi.
Yes found it buried under a bench.
Ill U2U.
Cheers Matt
|
|
|
Irony
|
| posted on 19/10/16 at 03:57 PM |
|
|
quote:
Originally posted by the_big_1
Hi Guys,
I need a Sierra uprights tapering out to accept the maxi ball joint etc.
Can you recommend who can help around the Midlands area?
I tried to contact MK a few times but no email response and no answering calls etc.
Cheers!
Yawn! Use the search function, there are hundreds of posts about it. You can do it with a reamer bought from Axminister Tools.
|
|
|
the_big_1
|
| posted on 19/10/16 at 04:01 PM |
|
|
They no longer sell it, haven't for years
|
|
|
Irony
|
| posted on 19/10/16 at 06:37 PM |
|
|
quote:
Originally posted by the_big_1
They no longer sell it, haven't for years
That told me then.
However when I did mine I think I bought two. If you sort me out some beer tokens for the delivery I post one to you. Or preferably you could pick it
up.
|
|
|
the_big_1
|
| posted on 19/10/16 at 06:39 PM |
|
|
lol it's always the way lol.
Hopefully the top man off here I am buying them
Off is going to send me his to do the job and post back.
You guys are fab!!!
|
|
|
ragindave
|
| posted on 20/10/16 at 06:58 AM |
|
|
Westfield drill out and put an insert in it may worth contacting them as they may be able to help and you are probaby not far from them.
|
|
|
