daveyp
|
| posted on 28/1/19 at 07:28 PM |
|
|
Sierra 4x4 and 13” wheels
Hello Everyone,
Looking for some help please before parting with money- running a sierra 4x4 rear end, diff, shafts, hubs but need to run 13” wheels. What Caliper
/disc combination would you recommend to fit ? Any machining isn’t an issue but just need to know where to start. The wheels are 13x7 supalights.
Cheers, Dave.
|
|
|
|
|
se7ensport
|
| posted on 28/1/19 at 07:47 PM |
|
|
I’ve fitted a Wilwood Powerlite kit, great brakes but crap handbrake. I run 8x13 CXRs and they clear.
|
|
|
daveyp
|
| posted on 28/1/19 at 07:52 PM |
|
|
Cheers for that, are they direct mount on to the lugs? I don’t need the handbrake as its hydraulic only, its a hill climb mini.
https://www.dropbox.com/s/0gt2fz5ci5xipsm/IMG_20180610_180239.jpg?dl=0
|
|
|
neilp1
|
| posted on 29/1/19 at 06:46 AM |
|
|
I run with 13" wheels over sierra rear callipers. Had to change to springs for the handbrake though.
|
|
|
se7ensport
|
| posted on 29/1/19 at 07:35 AM |
|
|
There are two kits for Sierra rears, mine comes with lugs as it’s the kit to replace drums, I’d check, but highly likely it’ll have a spacer or lug
bracket.
RallyDesign’s will sell them.
|
|
|
daveyp
|
| posted on 29/1/19 at 06:21 PM |
|
|
Thanks very much, I’ll give rally design a ring.
|
|
|
James
|
| posted on 30/1/19 at 03:16 PM |
|
|
I found that one set of Sierra 14" would fit over my 4x4 rear and one set of 14" wouldn't! 
Got 15" aftermarket alloys in the end!
------------------------------------------------------------------------------------------------------------
"The fight is won or lost far away from witnesses, behind the lines, in the gym and out there on the road, long before I dance under those lights."
- Muhammad Ali
|
|
|
