Printable Version | Subscribe | Add to Favourites
New Topic New Poll New Reply
Author: Subject: Help - TRE confusion
flak monkey

posted on 23/2/05 at 11:47 AM Reply With Quote
Help - TRE confusion

I have a MK2 escort steering rack (confirmed) with M14 threads on the track rods.

Ordered some TREs from MNR the other day, they arrived and they have the MK1 thread...ie 1/2"UNF.

Just got off the phone with MNR and very helpful as always. Just send them back etc. They said that the sierra and Mk2 escort TREs have the same thread (ie M14). So they can send me some sierra ends.

Are sierra and MK2 escort TRE's actually the same? If not whats different? And any differences going to cause any problems?

Hope thats not too confusing!

Cheers for any help,
David

[Edited on 23/2/05 by flak monkey]





Sera

http://www.motosera.com

View User's Profile Visit User's Homepage View All Posts By User U2U Member
Peteff

posted on 23/2/05 at 12:02 PM Reply With Quote
Escort are shorter than Sierra track rod ends. You might not get enough toe in with Sierra ones on a Mk2 rack, depends on your wishbone design.





yours, Pete

I went into the RSPCA office the other day. It was so small you could hardly swing a cat in there.

View User's Profile View All Posts By User U2U Member
flak monkey

posted on 23/2/05 at 12:14 PM Reply With Quote
How much longer are the sierra TREs? I will be using rack extensions anyway, due to building a wide track car....dont know if that will allow enough adjustment.

I also understand the sierra ends are offset...but that shouldnt be a problem right?

Of course i could just get them, see if they are ok...if not sell them to someone else who needs sierra TRE's

[Edited on 23/2/05 by flak monkey]





Sera

http://www.motosera.com

View User's Profile Visit User's Homepage View All Posts By User U2U Member
clbarclay

posted on 23/2/05 at 01:49 PM Reply With Quote
Have you tried general motor factors, i've looked at the prices for maxi ball joints and escort TRE on locost sites, and i'm sure you can get them a lot cheaper at the factors.
View User's Profile View All Posts By User U2U Member
flak monkey

posted on 23/2/05 at 01:54 PM Reply With Quote
Thats what i have decided to do as a matter of fact I am just about to send the TRE's back with a request for a refund. Hopefully shouldnt be a prob

They were only £5/each anyway! Cant be much cheaper than that from a motor factors...

Cheers for the help guys!

David





Sera

http://www.motosera.com

View User's Profile Visit User's Homepage View All Posts By User U2U Member
A fulton

posted on 23/2/05 at 08:11 PM Reply With Quote
TRE

Yes sierra tre are offset and £7.00 +VAT from motor facters put come with k nuts
View User's Profile View All Posts By User U2U Member

New Topic New Poll New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.