locoboy
|
| posted on 31/1/06 at 10:45 PM |
|
|
calliper bolts
What spec (thread size, length, and tensile strength) bolt do i need to bolt on my sierra calipers to my uprights?
Cheers
ATB
Locoboy
|
|
|
|
|
muzchap
|
| posted on 31/1/06 at 10:58 PM |
|
|
As long as they are hi-tensile steel with the 8.8 marking on the top that should be fine :-)
As for size - I think M12? Can't remember - just make sure they fit and are 8.8 hi-tensile!  (I've been told if not its an SVA
fail)
HTH
Murray
|
|
|
Chippy
|
| posted on 1/2/06 at 12:14 AM |
|
|
They are 10mm with a thread length of 25mm, (overall bolt length 32mm), and they should be 10.9 grade not 8.8.
|
|
|
