MK9R
|
| posted on 3/3/03 at 03:44 PM |
|
|
Threads and locking nuts
I'm sure i read on here somewhere about how many turns of thread should be sticking out from a the nylon of the nuts. I used a washer bothsides of
the wisbone pivots and this only allowed one turn of a thread to be showing. Is this a probllem for SVA?
|
|
|
|
|
kingr
|
| posted on 3/3/03 at 03:56 PM |
|
|
If it's sticking out the other side, I would have said it's fine, if you're particularly worried though, drill a hole through it, and put some lock
wire through it.
Kingr
|
|
|
Rorty
|
| posted on 4/3/03 at 12:42 AM |
|
|
As a general rule of thumb, the length of thread protruding through a nut should equal its diameter.
Cheers, Rorty.
"Faster than a speeding Pullet".
PLEASE DON'T U2U ME IF YOU WANT A QUICK RESPONSE. TRY EMAILING ME INSTEAD!
|
|
|
Ian Pearson
|
| posted on 4/3/03 at 09:50 AM |
|
|
ISTR that Mr SVA wants a minimum of two threads.
|
|
|
MK9R
|
| posted on 4/3/03 at 11:35 AM |
|
|
whats "ISTR"??
[Edited on 4/3/03 by MK9R]
|
|
|
kingr
|
| posted on 4/3/03 at 01:06 PM |
|
|
I seem to remember? - Just a guess
Kingr
|
|
|
MK9R
|
| posted on 4/3/03 at 03:12 PM |
|
|
arrh i see, internet geek talk!!  
Cheers Austen
RGB car number 9
www.austengreenway.co.uk
www.automatedtechnologygroup.co.uk
www.trackace.co.uk
|
|
|
Rorty
|
| posted on 5/3/03 at 01:26 AM |
|
|
MK9R:
quote:
whats "ISTR"??
I smell terrible recently? 
Cheers, Rorty.
"Faster than a speeding Pullet".
PLEASE DON'T U2U ME IF YOU WANT A QUICK RESPONSE. TRY EMAILING ME INSTEAD!
|
|
|
JohnFol
|
| posted on 5/3/03 at 12:35 PM |
|
|
Where are people sourcing the bolt head / nut / exposed thread covers from?
|
|
|
wicket
|
| posted on 5/3/03 at 01:47 PM |
|
|
Namrick in Portslade do them.
|
|
|
Ian Pearson
|
| posted on 8/3/03 at 09:27 AM |
|
|
Try TIFOSI
http://www.tifosi-devon.co.uk/
|
|
|
