pathfinder
|
 posted on 5/2/06 at 11:11 PM |
|
|
Sierra upright mushroom adapters!
Has anyone got a dimensioned drawing of these mushroom adapter jobbies! I used to work in a machine shop and recon I could make a set up no probs!
Failing that who is the cheapest supplier?
Cheers Chaps
|
|
|
|
|
flak monkey
|
| posted on 5/2/06 at 11:29 PM |
|
|
Hi,
I have a drawing of one that has been updated a few times.
Its here:
http://locostbuilders.co.uk/upload/upper%20ball%20joint%20adapter%20corrected.jpg
I havent used sierra uprights myself and the dimensions in that drawing were based on another drawing I found somewhere else on the net.
David
Sera
http://www.motosera.com
|
|
|
muzchap
|
| posted on 6/2/06 at 12:02 AM |
|
|
Hi Pathfinder,
no offence to Flak Monkey - but those drawings are slightly out...
I've tried them - they just don't quite work- the angle is slightly out for the ball joints and they are a bit narrow for sierra
uprights.
Check my pics and you'll see.
Over the next week or so I'll be doing some designs in SolidWorks - so can give you a copy then?
If you can wait that long?
|
|
|
RichieC
|
| posted on 6/2/06 at 07:38 AM |
|
|
I have a set in steel you can have for a tenner plus post if theyre any good. Not brand new but in fine condition
Rgds
Richie
|
|
|
