Mike McKinstry
|
 posted on 23/4/02 at 04:35 PM |
|
|
Brake m/cyl.-pedal.
Hi All,this may sound really stupid but I am trying to use sierra master cylinder in MK but am not sure how to or if I can use existing rod which
obviously passed through servo-can this be cut and if so how is it fitted back into and held in cylinder??
Also ,any tips on connecting to MK pedals or do I have to add or modify end of rod for pedal to sit in to.
Also any tips on clutch cables for pinto in mk-mk recommends mk 2 escort but I have seen on build site std. sierra used but do not understand how-is
brkt fitted to chassis before passing through bulk head?-again any tips on connecting to pedal.
Any help would be most appreciated,thanks Mike.
|
|
|
|
|
theconrodkid
|
| posted on 23/4/02 at 06:27 PM |
|
|
Yo Mike,the push rod sits in a hole in the master whitch is about 13mm deep,it wont fall out,drill through the pedal and use original clevis pin,as
for cables i would use mk 2 escort as it has an adjuster built in and seirra dosnt hth 
|
|
|
bob
|
 posted on 23/4/02 at 07:37 PM |
|
|
Mike
Just fitted the M/C in my indy this weekend with help from conrodkid.
If i can get hold of a digital camera in next few days i'll post a pic in the photo archives. 
|
|
|
Mike McKinstry
|
| posted on 24/4/02 at 11:59 AM |
|
|
Thanks Bob and C/R Kid,would really appreciate snaps of previously mentioned-the more the better!!!
|
|
|
bob
|
| posted on 22/5/02 at 09:15 PM |
|
|
Mike
finally got the pics,whats ya new e-mail address
|
|
|
paulbeyer
|
| posted on 23/5/02 at 08:56 AM |
|
|
Hi Bob,
Could you mail me the photos as well?
|
|
|
bob
|
| posted on 7/6/02 at 08:43 PM |
|
|
On its way.
Well i hope so anyway.
|
|
|
Mike McKinstry
|
 posted on 10/6/02 at 11:22 AM |
|
|
Bob, got your e-mail but cant retrieve pics, dont know why could it be your end??Mike.
|
|
|
bob
|
| posted on 10/6/02 at 09:02 PM |
|
|
Mike
Have sent them again mate.
|
|
|
paulbeyer
|
| posted on 11/6/02 at 03:06 PM |
|
|
Hi Mike / Bob
I got your pictures and opened them no problem.
Mike, they were zipped so you need to get hold of something like winzip to unzip them. Try http://www.winzip.com and download the free trial
version.
Hope this helps,
Paul, in Paris (not the gay part) 
|
|
|
