yvan
|
| posted on 28/4/06 at 10:23 AM |
|
|
Cortina alloy hub from compbrake = not fit ?
Hi,
I,m French, sorry my english isn't perfect.
I have a home made seven and I want to use a cortina upright like this :
I want too to change the steel hubs and I buy a kit from compbrake, like this kit :
Ebay
But, it's not the same bearing :
Hub steel bearing :
Smallest have the reference LM11749 + Lm 11710 (dimension inside 17.46, outside 39.88)
For the big, I have the reference L44649+L44610 (dimension inside 26.99, outside 50.29
But compbrake use this bearing :
small inner Koyo H! /cap LM 11949 J
small outer Lm 11910 ( size 19.050 inner, 45.237 outer)
large inner Koyo Hi /cap 1988R
large outer 1922 ( inner 28.575, outer 57.150)
Where is the trouble, did comprake send me wrong hubs, is there a confusion between hubs for cortina mk3/4 and cortina mk1/2 ?
Please, help me
Regards
Yvan
|
|
|
|
|
spaximus
|
| posted on 28/4/06 at 11:28 AM |
|
|
the ones as advertised are for an Escort and are differant to the Cortina. I don't know if they could be adapted best bet is to contact the
supplier and ask.
Jeff
|
|
|
flak monkey
|
| posted on 28/4/06 at 11:30 AM |
|
|
Yep, advert says they are to fit an escort. Which were slightly different hubs to the cortina items.
David
Sera
http://www.motosera.com
|
|
|
MikeRJ
|
| posted on 28/4/06 at 11:31 AM |
|
|
I think you have purchased hubs suitable for a Mk1 and Mk2 Escort. The seller has another Ebay auction for Cortina hubs and they are different (and
more expensive).
|
|
|
yvan
|
| posted on 28/4/06 at 01:52 PM |
|
|
I don't buy the kit via Ebay, I send him an email for the kit.
I ask in my order a kit for my cortina upright in black satin finish, and they send me hubs in alloy finish.
When I ask him bearing's size for cortina hubs, he confirm me the bigger size for the bearing, and for him, he send me a kit for cortina
upright.
I post pics later
[Edited on 28/4/06 by yvan]
|
|
|
theconrodkid
|
| posted on 28/4/06 at 03:45 PM |
|
|
says mk 1/2 tina and the rs/mexico escorts,these obviously not the same size as mk 3/4/5 tina and 11-1300 escorts.wrong ones suplied then
who cares who wins
pass the pork pies
|
|
|
Deckman001
|
| posted on 28/4/06 at 06:00 PM |
|
|
My hubs and Bearings will fit 
Jason
|
|
|
yvan
|
| posted on 29/4/06 at 08:58 AM |
|
|
Can somebody confirm me wich type of upright I have.
From burton power, the bearing are
BRT252 : capri mk1/2/3 (not 3.0), cortina mk1/2, escort mk1/2rs
BRT635: capri mk1/2/3 3.0
BRT266 = cortina mk3/4/5 1.3/1.6/2.0/2.3, escort mk2 ( not rs).
So, ther is two sort of cortina bearing, not the same.
[Edited on 29/4/06 by yvan]
|
|
|
rusty nuts
|
| posted on 29/4/06 at 09:57 AM |
|
|
Up rights look like Cortina mk 3/4/5 suspect as Conrod points out you have got Cortina mk 2 hubs
|
|
|
.jpg)
