scutter
|
| posted on 14/5/06 at 04:37 PM |
|
|
Powder coating tempretures
OK after a winter of driving the front ball joints and trackrod ends are looking shody,
The question is will the said joints withstand the temps involved with powdercoating?
ATB Dan.
|
|
|
|
|
pathfinder
|
| posted on 14/5/06 at 04:54 PM |
|
|
I doubt it very much! There is only one way to find out though
|
|
|
paulf
|
| posted on 14/5/06 at 08:09 PM |
|
|
They would need to be shotblasted first which would not do them any good and then heated to about 180c so I think not.
Paul.
|
|
|
paulf
|
| posted on 14/5/06 at 08:11 PM |
|
|
They would need to be shotblasted first which would not do them any good and then heated to about 180c so I think not.
Paul.
|
|
|
scutter
|
| posted on 15/5/06 at 06:26 AM |
|
|
Bugger, looks like some Smoothrite.
Thanks Dan.
|
|
|
.jpg)
