dirty130
|
| posted on 13/6/06 at 07:12 PM |
|
|
Taking apart the Master cylinder
Has any one taken apart the vacum on the master brake cylinder? i need the push rod out of the center im just about the brake the vacum apart any
ideas?
It will fit wheres me hammer?
|
|
|
|
|
theconrodkid
|
| posted on 13/6/06 at 07:35 PM |
|
|
there is a huge spring in there designed to take your face off if you split the servo,saw the pushrod off where it pokes out and extend it
who cares who wins
pass the pork pies
|
|
|
James
|
| posted on 14/6/06 at 08:02 AM |
|
|
quote:
Originally posted by dirty130
Has any one taken apart the vacum on the master brake cylinder? i need the push rod out of the center im just about the brake the vacum apart any
ideas?
Cut mine open with a grinder. Kept cutting till I had the bits I wanted.
Wear goggles, gauntlets and ear defenders!!!!!
HTH,
James
------------------------------------------------------------------------------------------------------------
"The fight is won or lost far away from witnesses, behind the lines, in the gym and out there on the road, long before I dance under those lights."
- Muhammad Ali
|
|
|
