David Jenkins
|
 posted on 24/4/03 at 09:48 AM |
|
|
Spring rate for front of X-flow car
I'm working up a shopping list for Stoneleigh...
Currently I have 200lb/in springs on the front of my X-flow powered car, and they seem too light - I have had to use tons of pre-load to get the car
to the right height, and it doesn't take much to bounce the car right down.
I know people have settled on 275lb for the Pinto engined cars, but what's good for a car like mine?
cheers,
David
|
|
|
|
|
wicket
|
| posted on 24/4/03 at 11:52 AM |
|
|
David
I have 300lb/in from Luego as recommended by them for there 'book' chassis. Not on the road yet so can't tell you what it like !
|
|
|
dozracing
|
| posted on 1/5/03 at 12:50 PM |
|
|
Hi David,
I supply 275lbs/in on my shock kits for the Xflow engine, and everyone seems happy with that.
Kind regards,
Darren
|
PLEASE NOTE: This user is a trader who has not signed up for the LocostBuilders registration scheme. If this post is advertising a commercial product or service, please report it by clicking here.
|
David Jenkins
|
| posted on 1/5/03 at 01:00 PM |
|
|
Thanks, Darren
(& wicket!)
|
|
|
