Jasper
|
posted on 12/5/03 at 01:55 PM |
|
|
Steering rack nuts??
Are the nuts to lock the track rod ends (steering rack) an odd size?? Or some standard metric ones. I'm using an Escort rack.
|
|
|
Viper
|
posted on 12/5/03 at 03:57 PM |
|
|
M14 standard pitch
|
|
Jasper
|
posted on 12/5/03 at 05:58 PM |
|
|
Cheers
|
|
Viper
|
posted on 12/5/03 at 06:04 PM |
|
|
anytime
|
|
craig1410
|
posted on 12/5/03 at 10:09 PM |
|
|
Viper,
Do you happen to know if the threads on the ends of a Sierra rack are also M14 standard. I am meaning the ones on the end of the rack bar where they
connect to the track rod inner balljoints. I ask because I intend to shorten a Sierra rack and need to know how to retap the rack once I cut it to
length.
Cheers,
Craig.
|
|
Viper
|
posted on 12/5/03 at 10:12 PM |
|
|
sorry mate, i haven't any experiance of the siera rack.
|
|
craig1410
|
posted on 12/5/03 at 10:17 PM |
|
|
Bloody 'ell mate that was a quick response...3 minutes flat!
No worries, I'll get a thread gauge and check it myself.
Thanks,
Craig.
|
|
Peteff
|
posted on 13/5/03 at 10:00 AM |
|
|
Why not get a nut and try that? Cheaper than a thread gauge.
yours, Pete.
yours, Pete
I went into the RSPCA office the other day. It was so small you could hardly swing a cat in there.
|
|
craig1410
|
posted on 13/5/03 at 12:34 PM |
|
|
Pete,
A sensible idea and I'll probably do just that. However, I think a thread gauge is a worthwhile addition to the toolbox as well.
Cheers,
Craig.
|
|
dutchsuperseven
|
posted on 13/5/03 at 06:30 PM |
|
|
quote: Originally posted by craig1410
Viper,
Do you happen to know if the threads on the ends of a Sierra rack are also M14 standard. I am meaning the ones on the end of the rack bar where they
connect to the track rod inner balljoints. I ask because I intend to shorten a Sierra rack and need to know how to retap the rack
once I cut it to length.
According to my Borg&Beck catalogue all the ford track rod ends are M14x2.0. Except escort mkI, Capri and a few fwd models.
Cheers,
Craig.
Sex, drugs and Supersevens
|
|
craig1410
|
posted on 13/5/03 at 07:09 PM |
|
|
Thanks for that!
Craig.
|
|