Coose
|
 posted on 29/8/06 at 02:35 PM |
|
|
Escort rear wheel cylinder sizes?
Does anyone know the available wheel cylinder sizes for an English axle? I really need bigger cylinders (or 9" drums, but if I go to the hassle
of that I may as well change to discs) so I could do with knowing the available sizes to compare against the existing ones.
Cheers!
Spin 'er off Well...
|
|
|
|
|
Syd Bridge
|
| posted on 29/8/06 at 02:52 PM |
|
|
The vans had bigger rear wheel cylinders than the cars. It is common in Aus to fit van rears on se7ens.
Cheers,
Syd.
|
|
|
andrews_45
|
| posted on 29/8/06 at 03:39 PM |
|
|
i know somebody selling a whole axle off a westfield complete with 9" drums, fully rebuilt, new seals etc etc
|
|
|
02GF74
|
| posted on 29/8/06 at 03:41 PM |
|
|
to start you off; from haynes, mk2 escort book:
1100 cc saloon,estate,6 cwt van.....19.05
1100 cc 2V, 1300cc .........................20.64
1300 cc and 1600 cc .......................17.78
9 cwt van ........................................20.68
all mm.
|
|
|
Coose
|
| posted on 29/8/06 at 03:47 PM |
|
|
quote:
Originally posted by 02GF74
to start you off; from haynes, mk2 escort book:
1100 cc saloon,estate,6 cwt van.....19.05
1100 cc 2V, 1300cc .........................20.64
1300 cc and 1600 cc .......................17.78
9 cwt van ........................................20.68
all mm.
Now that's what I was after! Cheers! 
I just need to measure mine now....
I don't want to go down the route of buying a whole axle just for the drums - as I said I'd rather go to discs instead but I'd
rather try some small mods (such as cylinders) as that may be all I need! Cheers anyway....
Spin 'er off Well...
|
|
|
