loafersmate
|
| posted on 18/8/03 at 03:34 PM |
|
|
Diff rebuild
After having stripped my spare sierra diff to the bare bones I now need to put it back together! Anyone know the correct proceedure for setting the
crownwheel to pinion clearance with the two screw-in bearing carriers?
Cheers
Ben
|
|
|
|
|
loafersmate
|
| posted on 20/8/03 at 04:30 PM |
|
|
come on you lot.....little help required here!
|
|
|
mad-butcher
|
| posted on 21/8/03 at 07:08 PM |
|
|
i've got a dodgy bearing on my lsd and thought about rebuilding it. then thought if i get this wrong do i really want shrapnel in my back. so i
decided don't f### with things i don't understand
sorry
tony
|
|
|
Bob C
|
| posted on 22/8/03 at 06:53 PM |
|
|
diff setup
I have a mazda dealer workshop manual describing setting up a diff - used "red lead" paint from memory presumably a variant of the
"engineers blue" method. Do you want me to send you the relevent pages?
|
|
|
loafersmate
|
| posted on 26/8/03 at 09:12 AM |
|
|
Thanks anyway but i've gone for the 'fettle it till it feels ok' method! Tried to fit it at the week-end only to find that 7"
diff driveshafts don't fit 6.5" diffs So now i'm after some thinner driveshafts to match the new diff and save some weight
cheers
ben
|
|
|
Bob C
|
| posted on 26/8/03 at 11:50 AM |
|
|
diff setup
be a bit careful - there's a whole range of settings which will "feel" alright but won't be meshing the gears properly, that
would lead to faster wear and weakness. I haven't been inside a small sierra diff, I know the mazda one uses a collapsing tube section to
control the pinion position, and this would not be obviously an adjustment, if you know what I mean.
cheers
Bob C
|
|
|
loafersmate
|
| posted on 26/8/03 at 12:02 PM |
|
|
I haven't taken the pinion out, I only removed the large screw-in bearing carriers and took the crownwheel assembly out. As for the diffs
lifespan it's unknown as yet....it might have already done 150,000mls for all I know (all the gubbins inside looked good though) and I'm
still short of those driveshafts to try it out!..........I still have to wonder if it needs to go any faster though, had a good time chasing bikes
back from Cadwell BSB yesterday
|
|
|
