liam.mccaffrey
|
| posted on 29/6/08 at 05:11 PM |
|
|
Dimension Check
I'm considering switching and making my mx5 +442 locost right hand drive using a rally design quick rack.
could someone measure the distance between the inner ball joints on theirs for me please
or just measure their escy rack if they're the same
thanks
Build Blog
Build Photo Album
|
|
|
|
|
Volvorsport
|
| posted on 29/6/08 at 05:59 PM |
|
|
youll need extenders , if you shorten the rack properly , you can get them from rally design . im using a shortened sierra rack
www.dbsmotorsport.co.uk
getting dirty under a bus
|
|
|
omega 24 v6
|
| posted on 29/6/08 at 06:21 PM |
|
|
Mines (442) has a std escort rack(MK2) and it does suffer from bump steer But it'll have to wait till after sva to be sorted out. It does seem
to be quite noticeable as well (not been driven on road yet)
[Edited on 29/6/08 by omega 24 v6]
If it looks wrong it probably is wrong.
|
|
|
liam.mccaffrey
|
| posted on 1/7/08 at 06:21 PM |
|
|
as far as i can tell without actually measuring one the dimension im looking for 590mm
Build Blog
Build Photo Album
|
|
|
