Dickyboy
|
| posted on 12/10/08 at 08:53 PM |
|
|
Pipe layouts
I know that SVAman wants P clips or similar to prevent chafing of brake pipes on the chassis, what about the rear axle (Escort MkII) as far as I can
see the pipes were clamped with tags on the original axle. What is required for SVA?
|
|
|
|
|
Humbug
|
| posted on 12/10/08 at 09:50 PM |
|
|
Speaking purely from my own experience, I passed SVA with the brake pipes covered with sleeves made from slit fuel hose, then held onto the axle with
honking great jubilee clips that I found in B&Q.
|
|
|
blakep82
|
| posted on 12/10/08 at 10:41 PM |
|
|
mine are going to be done with clear heat shrink, and at worst, reallllllly long tie wraps. at best, i might think of a better way.
________________________
IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083
don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!
|
|
|
