adam1985
|
| posted on 19/10/08 at 03:40 PM |
|
|
what brake fitting
hi all im just trying to work out what fittings i need for my brake lines im using 3/16 knuifer pipe. all the brake fittings seem to be either 3/8/unf
or m10x1.0 which do i go for or does it not matter is one just metric and the other imperial i take it my whole brake system is just going be one or
the other
cheers adam
|
|
|
|
|
blakep82
|
| posted on 19/10/08 at 03:43 PM |
|
|
m10x1 fittings will not fit in a 3/8 unf hole and vice versa!
you need to know what holes are in your master cylinder, and in your calipers, and any T peices, and get fittings to fit each one.
the pipe itself should fit ok (i think)
________________________
IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083
don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!
|
|
|
adam1985
|
| posted on 19/10/08 at 03:47 PM |
|
|
i am running standard sierra calipers all round with the sierra master cylinder do you know which these are then i can get all the same to suit i dont
have any T's or anything else yet
[Edited on 19/10/08 by adam1985]
|
|
|
blakep82
|
| posted on 19/10/08 at 03:50 PM |
|
|
i don't know what they are exactly, but they'll be metric. most likely M10x1. hopefully should have my calipers in by the end of the week
________________________
IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083
don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!
|
|
|
adam1985
|
| posted on 19/10/08 at 03:53 PM |
|
|
oh yeah ive just brought the hoses for sale in the other post which he said fits sierra calipers and says m10x1 so that makes sense now cheers for the
help adam
|
|
|
blakep82
|
| posted on 19/10/08 at 03:56 PM |
|
|
ha ha oh yeah! i read that same thread earlier today too.
________________________
IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083
don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!
|
|
|
