pekwah1
|
| posted on 17/2/11 at 09:47 PM |
|
|
how much should a ct133 cost?
as above, i bought a standard sierra release bearing which was around £12.
They now want around £35 for the ct133 (capri release bearing) which i thought was a bit much....
|
|
|
|
|
RichardK
|
| posted on 17/2/11 at 09:51 PM |
|
|
But do you get a free clutch with it? 
Gallery updated 11/01/2011
|
|
|
austin man
|
| posted on 17/2/11 at 09:51 PM |
|
|
I paid just short of £40
Life is like a bowl of fruit, funny how all the weird looking ones are left alone
|
|
|
pekwah1
|
| posted on 17/2/11 at 09:52 PM |
|
|
you'd bloody think so for that price!
should it be around a tenner like the other one?
|
|
|
big_wasa
|
| posted on 17/2/11 at 09:54 PM |
|
|
give this place a try. Been in the stores, bearings as far as you can see.
Automotive Bearings Ltd
6 - 8 Sandall Road
Wisbech
Cambridgeshire
PE13 2TA
England
Tel: (+44) (0)1945 474448
Fax: (+44) (0)1945 474466
|
|
|
pekwah1
|
| posted on 17/2/11 at 09:55 PM |
|
|
thanks very much, i'll give them a call!
|
|
|
norfolkluego
|
| posted on 17/2/11 at 10:00 PM |
|
|
Picked one up for Luegojnr a couple of weeks ago (he's doing a Zetec swop) from Wilco in Norwich, cost £16 (and some pence, can't remember
the pence)
|
|
|
Danozeman
|
| posted on 17/2/11 at 10:02 PM |
|
|
AS above. should be less than 20 quid. I need one so hopefully theyr havent shot up in price!!!
Dan
Built the purple peril!! Let the modifications begin!!
http://www.eastangliankitcars.co.uk
|
|
|
Bumble
|
| posted on 17/2/11 at 10:23 PM |
|
|
Paid £17 for mine.
|
|
|
carlknight1982
|
| posted on 17/2/11 at 10:24 PM |
|
|
whats the difference with a ct133 and a standard sierra bearing?
Logic will get you from a A to B
Imagination will take you everywhere.
|
|
|
eddie99
|
| posted on 17/2/11 at 10:25 PM |
|
|
As above, i paid just under £20 for mine 
http://www.elitemotorsporteng.co.uk/
Twitter: @Elitemotoreng
Facebook: http://www.facebook.com/pages/Elite-Motorsport-Engineering/153409081394323
|
NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
|
Tatey
|
| posted on 17/2/11 at 10:35 PM |
|
|
I paid £25 for mine from my local motor factors, they had to order it in but it arrived within 3 hours so I wasnt complaining.
|
|
|
lotusmadandy
|
| posted on 18/2/11 at 04:01 PM |
|
|
A ct133 is thicker than a sierra bearing.
Andy
|
|
|
Alan B
|
| posted on 18/2/11 at 04:48 PM |
|
|
I haven't actually bought one but I'd probably pay less than 20 quid too....
[Edited on 18/2/11 by Alan B]
|
|
|
paulf
|
| posted on 18/2/11 at 06:02 PM |
|
|
I have used the standard sierra one with no problems for the last 4 years, actually it was the one fitted to the box when I picked it up in the
scrapyard.
Paul
|
|
|
.jpg)
.jpg)
