Simon
|
| posted on 29/6/02 at 08:22 PM |
|
|
Axle Position
Hi Guys,
As I'm using the Sierra IRS, and don't have a live axle to play with, could someone let me know the distance from the back of M1/M2 to the centre of
their axle. This should give me a good idea where the Sierra subframe is going to fit into my chassis.
Thanks very much
ATB
Simon
|
|
|
|
|
Jon Ison
|
| posted on 29/6/02 at 09:05 PM |
|
|
If M1 is the Btm rear chassis rail, (iv'e lent my book to a budding builder) mine is 6 1/2". Live cortina axle. 
|
|
|
Simon
|
| posted on 29/6/02 at 10:09 PM |
|
|
Jon,
Thanks for reply. M1/M2 is the rearmost vertical piece. I think that from where you are referring to M1 is 5 1/2", so I guess a total 12". Was your
5 1/2" to the centre of your axle or the front "edge"?
Thanks again
Simon
|
|
|
Simon
|
| posted on 29/6/02 at 10:12 PM |
|
|
Jon,
My prev post did of course refer to your 6 1/2" measurement, not 5 1/2". Then it would add up to 12"
ATB
Simon
|
|
|
