Miks15
|
| posted on 28/8/08 at 08:04 PM |
|
|
Which master cylinder?
Im half way through my pedal box consruction, and im not going to use my BMW master cylinder.
Any recomendations on what to get? Baring in mind cost! Plus my engine has hydraulic clutch so will need another master cylinder for this aswell.
So whats everyone else used?
Cheers
|
|
|
|
|
blakep82
|
| posted on 28/8/08 at 08:11 PM |
|
|
i'm using the girling type. pretty much universal, pretty cheap too i think. you can get them for £25 each (but not actual girling ones)
[Edited on 28/8/08 by blakep82]
________________________
IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083
don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!
|
|
|
Miks15
|
| posted on 28/8/08 at 08:16 PM |
|
|
where abouts can you get them from?
|
|
|
blakep82
|
| posted on 28/8/08 at 08:21 PM |
|
|
http://www.cbsonline.co.uk/master-cylinders-44-c.asp
well, £28 for girling ones from CBS
or wilwood from rally design
http://www.rallydesign.co.uk/index.php?cPath=562_582
little bit cheaper (both need vat applied)
integral ones are a little more expensive, but non integral ones need a additional resevoir
________________________
IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083
don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!
|
|
|
Miks15
|
| posted on 28/8/08 at 08:27 PM |
|
|
and which master cylinders should i be looking at for brakes? whats needed for back and whats needed for front? and what about clutch?
|
|
|
sucksqueezebangblow
|
| posted on 29/8/08 at 08:19 AM |
|
|
I've got a brand new Girling remote.75" one spare 'cause I switched to .675" for my clutch. £20 plus postage if you are
interested.
[Edited on 29/8/08 by sucksqueezebangblow]
Better to Burnout than to Fade Away JET METAL ~ AndySparrow © 
|
|
|
