maccmike
|
| posted on 20/1/15 at 06:02 PM |
|
|
Thats a shame.
Yes I will give them a call in a month or so.
Thanks for all your effort.
|
|
|
|
|
lsdweb
|
| posted on 20/1/15 at 06:22 PM |
|
|
Daft question!
When measuring my existing dampers, do I take the closed length to be the length it would be fully closed with no bump stop?
Sorry for being twp (Welsh for stupid!)
Ta
Wyn
|
|
|
bart
|
| posted on 20/1/15 at 08:35 PM |
|
|
if it helps this is how I specified mine
Front
2 off shocks series 400 single valve
1.9 id 200lbs spring rate
Valve to suit please
13” open length
10.5” fully closed including bump stop
Clarification = 2.5” full travel including compressed bump stop
½ spherical bearing each end to 32 mm wide
Rear
2 off shocks series 400 single valve
1.9 id 325 lbs spring rate
Valve to suit please
13.5” open length
9.5” fully closed including bump stop
Clarification = 4” full travel including compressed bump stop
½ spherical bearing each end to 32 mm wide
I set of adjustment spanners.
BE ALERT > BRITAIN NEEDS LERTS
|
|
|
bart
|
| posted on 21/1/15 at 05:58 PM |
|
|
any idea where to pay to ceebmoj
[Edited on 21/1/15 by bart]
BE ALERT > BRITAIN NEEDS LERTS
|
|
|
lsdweb
|
| posted on 22/1/15 at 10:54 AM |
|
|
If this deal is still on can I please have -
2 * 600 Series Double Adjustable 2.25 id open 12.75" closed 8.75" closed length between mounting holes (to include bump stop)
4 * (2 each of top and bottom) bearing spacers 1 1/4" x 12mm
(Same as Rich J but a quarter of an inch shorter)
Let me know about payment please.
Thanks.
|
|
|
cloudy
|
| posted on 26/1/15 at 10:01 AM |
|
|
Ceeb, we seem to be going in circles on this one - I'd be concerned now sending over money in case it all stalls again. If you no longer have
the time to complete this group buy, would you hand it over to someone else?
James
www.warnercars.com
|
|
|
lsdweb
|
| posted on 26/1/15 at 03:39 PM |
|
|
Hi Ceeb
I'm going to have to pull out - sorry.
Thanks for your efforts
Regards
Wyn
|
|
|
cloudy
|
| posted on 27/1/15 at 11:39 AM |
|
|
Hi Ceeb, appreciate your efforts, but I can't wait any longer on these I'm afraid - I also need to pull out 
James
www.warnercars.com
|
|
|
ceebmoj
|
| posted on 30/1/15 at 06:14 PM |
|
|
Hi, sorry for the lack of updates (last minute work trip out of the country) and I appreciate that some have you have had to move on and purchase your
bits. The requests for funds and shipping addresses will go out tomorrow evening to those who have not dropped out.
|
|
|
Fcck2000
|
| posted on 30/1/15 at 06:36 PM |
|
|
quote:
Originally posted by cloudy
Hi Ceeb, appreciate your efforts, but I can't wait any longer on these I'm afraid - I also need to pull out
James
Not sure if protech will still do it but I contacted them directly and asked for the group buy discount. They gave me double adjustable a for £150
each inc vat and I got mine about 2 weeks ago. I got the impression they only did it because I wanted double adjustables.
Paul
Tiger SSC
220bhp on standard MZR Duratec engine with throttle bodies and mild camshaft upgrade.
|
|
|
ceebmoj
|
| posted on 2/2/15 at 02:53 PM |
|
|
I am going to have to admit defeat with the group buy we now have insufficient people to proceed. Sorry chaps.
|
|
|
Fcck2000
|
| posted on 2/2/15 at 03:00 PM |
|
|
quote:
Originally posted by ceebmoj
I am going to have to admit defeat with the group buy we now have insufficient people to proceed. Sorry chaps.
It's a nightmare trying to do group buys when people want different things. Well done for trying and thanks because I did manage to get mine at
a good price :-)
I would contact Protech and explain how the group buy has fallen through due to them not being more proactive to help getting it all sorted. They were
obviously really busy at the time, lots of phone calls not answered was my experience.
Maybe if people who still want them just go direct to Keith and explain how they opted for the group buy which fell through and ask for the group buy
prices.
Out of interest.. Did you even manage to get a set for yourself?
Mine are all now fitted to the Supercat and corner weight setup, can't wait to get out on track and start playing with the settings, hopefully
will see some good results.
Paul
Tiger SSC
220bhp on standard MZR Duratec engine with throttle bodies and mild camshaft upgrade.
|
|
|
ceebmoj
|
| posted on 2/2/15 at 06:22 PM |
|
|
Selective quote
quote:
Originally posted by Fcck2000
Maybe if people who still want them just go direct to Keith and explain how they opted for the group buy which fell through and ask for the group buy
prices.
Out of interest.. Did you even manage to get a set for yourself?
Unfortunately I have not yet, got a set of shocks.
I would recommend that people give Keith at protec a ring and see what he can do. This is how I'm planning on moving forward.
[Edited on 2/2/15 by ceebmoj]
|
|
|
b14wrc
|
| posted on 18/2/15 at 12:27 PM |
|
|
I havnt got mine either, never got the message.....
20vt powered rear engined locost
|
|
|
