Daddylonglegs
|
| posted on 16/2/09 at 01:02 PM |
|
|
Prop Shaft
Anyone know if these are any good?
Link
Thanks.
JB
It looks like the Midget is winning at the moment......
|
|
|
|
|
Mark Allanson
|
| posted on 16/2/09 at 01:29 PM |
|
|
...does digitally balanced mean he has done it with his fingers?
Seriously though, I have never heard of one breaking
If you can keep you head, whilst all others around you are losing theirs, you are not fully aware of the situation
|
|
|
MikeR
|
| posted on 16/2/09 at 01:34 PM |
|
|
This was asked recently and someone posted that one or two of the robin hood prop's had historically failed. The belief was the wall on the tube
was too thin.
Recent comments about robin hood (great british sportscars) have been very good.
Ask them what thickness wall / quality tube they use & if they'll guarantee it to a certain BHP. Do the same with some of the other prop
manufactures and compare responses (then post on here  )
|
|
|
blakep82
|
| posted on 16/2/09 at 06:29 PM |
|
|
i asked a question about them too, was told the stories about them being weak, so got a few quotes for others. bariley morris were £140+vat. no thank
you, a local place was £138 + vat, noooooo,
dunning and fairbank came in at £105 + vat, so i went with them 
________________________
IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083
don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!
|
|
|
JoelP
|
| posted on 16/2/09 at 07:19 PM |
|
|
quote:
Originally posted by Mark Allanson
...does digitally balanced mean he has done it with his fingers?
Seriously though, I have never heard of one breaking
ive heard of many props breaking in use, including one that wasnt a DIY effort. My mate has a nice scar on his leg from his.
|
|
|
