Mark G
|
| posted on 1/3/09 at 07:29 PM |
|
|
Blade engine and Koso RX1N Solution?
Hi all,
I've seen that many people on here have had problems with their blade engines and Koso clusters. I've tried a few different ways of
getting the revs right, I wanted to know if anyone has actually got a solution for this? I find it hard to believe that nobody has managed to get
these two working correctly.
Can those of you with a blade engine also watch THIS VIDEO and tell me if you
agree with the readings from the rev counter, It looks about right if maybe a little high. On this video its set to a 12 cylinder 4 stroke engine.
|
|
|
|
|
Hellfire
|
| posted on 1/3/09 at 07:59 PM |
|
|
Definitely looks like the rev counter is reading high
Phil
|
|
|
Meeerrrk
|
| posted on 1/3/09 at 11:48 PM |
|
|
agreed, but functionally seems ok (ie its moving!) its not too high though, they idle pretty high dont forget
For Sale : 2008 Aries/Stuart Taylor Motorsport Locoblade (954 Blade)
|
|
|
Hugh_
|
| posted on 2/3/09 at 12:00 AM |
|
|
Also agree it looks as if its over-reading. I doubt it went above 4-4.5k
|
|
|
