smart51
|
posted on 17/4/09 at 04:44 PM |
|
|
Telewest set top box doing funny things
It seems to be stuck in a programming cycle where it says "Pdld" then swaps between "LAit" and "EAAS" then count
upto about 4000 before starting all over again repeatedly. If the TV is on, the picture is please wait, before switching to the TV briefly then
starting again. If you're trying to watch a DVD it takes control of the picture every 2 mintues.
Telewest / Virgin media say they can get to us on Monday afternoon, which is just great. Has anyone on here had this problem. Is there a way I can
fix the box myself.
|
|
|
BenB
|
posted on 17/4/09 at 06:38 PM |
|
|
when my telewest box went nuts they said it was a problem updating itself they said to leave it switched off (at the plug) for 12 hours then switch it
on again. Did the job for me.
|
|
aaron bassett
|
posted on 17/4/09 at 06:40 PM |
|
|
the problem is the flash chips have become corropet or has a bad connection on the board they are 48 pin chips if you have a paint stripper just blast
over the chip to reflow the solder under the chip 9 times out of 10 this work falling that phone telewest
|
|
aaron bassett
|
posted on 17/4/09 at 06:42 PM |
|
|
"Pdld" "LAit" and "EAAS" is telewest trying to update the chip
|
|
ashg
|
posted on 17/4/09 at 08:35 PM |
|
|
go to the shed find the biggest hammer you have and ill leave you work out the rest
Anything With Tits or Wheels Will cost you MONEY!!
Haynes Roadster (Finished)
Exocet (Finished & Sold)
New Project (Started)
|
|
macspeedy
|
posted on 17/4/09 at 09:31 PM |
|
|
quote: Originally posted by smart51
It seems to be stuck in a programming cycle where it says "Pdld" then swaps between "LAit" and "EAAS" then count
upto about 4000 before starting all over again repeatedly. If the TV is on, the picture is please wait, before switching to the TV briefly then
starting again. If you're trying to watch a DVD it takes control of the picture every 2 mintues.
Telewest / Virgin media say they can get to us on Monday afternoon, which is just great. Has anyone on here had this problem. Is there a way I can
fix the box myself.
HAVE TO TALK TO A MAN IN THE KNOW
|
|
smart51
|
posted on 18/4/09 at 08:11 AM |
|
|
I took the smart card out of the box this morning. There's a very charred square where the chip is. I guess its fried then.
|
|